How would you like your appliance to be installed?

Here you will find installation options to help you choose the right combination of washing machine and tumble dryer.
Washer-dryer stack
If there is not sufficient space available to install two appliances next to one another, most Miele washing machines and tumble dryers can be conveniently combined as a washer-dryer stack. In this arrangement, the washing machine is always installed under the tumble dryer.
The WhiteEdition appliances are ideal for stacking. The door hinge on the tumble dryers from this range can be changed so that the doors open in the same direction on both appliances.
Miele offers various stacking kits for combining the appliances in a stable manner. Some feature a practical drawer. This drawer is ideal for storing accessories, for example, or for conveniently resting the laundry basket on whilst loading and unloading the tumble dryer.
Side-by-Side
Technically and visually, Miele washing machines and tumble dryers match each other perfectly. This allows you to install both appliances side by side and easily transfer freshly washed laundry to the tumble dryer.
Installation with plinth
With the plinth (WTS 510), you can increase the appliance height by approx. 30 cm – achieving a convenient working height. This makes operating the machine much more ergonomic and convenient. At the same time, the plinth offers storage space, for example for detergent or a laundry bag, so you can quickly have everything at hand – and have everything quickly tidied away again.
Slot-in
All Miele front loaders slot in under a worktop with a minimum niche height of 85 cm. This installation option does not require the appliance lid to be removed. W1 ChromeEdition appliances with straight control panels are particularly suitable for this type of installation.
Built-under
Miele ChromeEdition appliances with a straight control panel can be installed under a worktop if the maximum installation height below the worktop is between 82 and 85 cm. In such cases, the appliance lid is replaced with a building-under kit (e.g. UBS W1/G or UBS T1/G).
Features depend on model